E 550 CR / E 550 PMCR

Feed speed: 9 m/min
Panel thickness: min 8 – max 50 mm
Edge thickness in coils: 0,4 ÷ 3 mm
Minimum panel length
without corner rounding function (side being processed): 110 mm
Minimum panel length
with corner rounding function (side being processed): 200 mm
Minimum panel width: 95 mm

Maximum finishing quality:

  •      Chain feeding system
  •      Pre-milling (version E550PMCR)
  •      Corner rounding unit
  •      3 free spaces for finishing units

High performance:

  •      9 m/min feed speed
  •      50 mm panel height
  •      3 mm edge coils
  •      110 mm minimum panel length

Minimum space occupied:

  •     length 3,7 m

Easy to use:

  •      unit settings with a piece of edge
  •      easy and intuitive use of machine

Pre-milling with diamond cutter blocks:
(version E550PMCR)

  •     N. 2 diamond cutter blocks at opposite rotation Ø 60 h 52 mm with 2 extractor hoods Ø 80 mm
  •     Feed guide with micrometric adjustment 0 ÷ 2.0 mm
  •     HF motors 2 x 0.75 kW 12000 rpm
  •     Max milling adjustment of 2 mm with panel heights 8–50 mm

Panel chain feeding system with rubber pads:

  •     Feed speed 9 m/min
  •     Top bar with double row of rubber rollers adjustable in height

Corner rounding unit for finishing corners on straight and shaped panels:

  •     Maximum processing quality thanks to accurate machining with a double linear support guide and a diamond cutterblocks
  •     Possibility of processing panels up to a height of 45 mm and edges up to 3 mm in thickness
  •     Unit controlled by PLC, with the possibility of choosing whether to process all corners or only front ones or only rear ones.

3 free spaces for finishing units:

  •     Edge scraper: perfect edge finishing, even in backlight
  •     Glue scraper: removes glue residues, guaranteeing perfect panel finishing
  •     Buffing unit: which polishes, giving uniformity to the colour of the edge where it has been processed

“PURE” Glueing unit  (opt.)
Revolutionary glueing technology
“At last, perfect glueing for every level of investment”

  •     The unit can work both with PUR or EVA glue, no cleaning is required even if machine does not work for a few days.
  •     Manual loading with hot melt adhesive granules.
  •     Quick and easy glue pot cleaning.
  •     An extra interchangeable glue pot is avaialble, upon request.
  •     Finishing, bonding and sealing of edge incomparable respect to traditional glueing systems.

Write a review

Note: HTML is not translated!
    Bad           Good

  • Product Code:
  • E 550 CR / E 550 PMCR



Wood Working Machinery Category File.pdf [4.26MB]

© Copyright 2018 Midco Equipment L.L.C All Rights Reserved.